Shattering Glass Bakeware Back in the News

Here’s a scary statistic from Consumer Reports: In the U.S. annually, an estimated 11,882 people visit emergency rooms because of injuries from glass bakeware. Some of these accidents are, no doubt, due to slippery fingers. But, Consumer Reports analyzed 163 glassware accidents and found that 55% involved glass that shattered while still in the oven. Many victims also reported that, while they were carrying hot bakeware  or when they set it on a counter, it “exploded” and sent shards flying, often causing injuries.

 

In response to the many complaints related to “exploding” glassware in news reports and online, Consumer Reports embarked upon a year-long study involving product testing. The results, published in the January 2011 issue, led to a recommendation that the Consumer Product Safety Commission investigate further.

 

Because Pyrex and Anchor Hocking “own 75% of the glass bakeware market,” these are the products that were tested, along with European brands.

American-made Pyrex and Anchor Hocking are made from soda lime glass, while the European products are made from borosilicate, a more expensive glass. The magazine says, “European glass pans withstood our extreme heat tests better than U.S. pans.” However, of the breakage incidents the magazine studied, 78% of users said the temperature they used was 375° or less. This lengthy article provides details about test results as well as anecdotal reports from consumers who have had injuries from glassware products.

 

If you are using glass bakeware, here are some of the precautions that Consumer Reports and the manufacturersrecommend to avoid breakage and flying shards:

 

• Always set hot glassware on a dry cloth or potholder, never directly on a counter, metal trivet, damp towel, cold wet surface, or burner.

 

• Always let the oven fully preheat before placing glassware in it.

 

• Before cooking meat or vegetables, cover the bottom of the dish with liquid.

 

• Once the glassware is hot, don’t add water to it.

 

• Carefully inspect your glassware for chips, cracks, or scratches.

Damaged dishes “may not offer the same safety margin as new dishes,” an expert told Consumer Reports.

 

• If you’re using the dish in the microwave, 1) don’t use the browning element and 2) don’t overheat oil or butter.

 

Shelf Life Advice has covered the risks related to “exploding” Pyrex in a previous article. (See “Pyrex Glassware: is it safe to use?” http://shelflifeadvice.com/content/pyrex-glassware-safe-use, so we were happy to see this hazard being addressed by a widely read and respected publication.

 

Here are our recommendations:

 

1. If you plan to purchase glass bakeware, European-made products might be a safer bet.

 

2. If you buy American-made glass cookware, read the instructions and warnings carefully and save them to refer to whenever you use the product.

 

3. If you already own glass bakeware but no longer have the packaging or booklet about proper use, go online and check the manufacturer’s usage tips. (There may be even more than what’s listed above.)

 

4. Consider purchasing and using metal bakeware for all baking except in the microwave.

 

If you are unfortunate enough to have (or have had) an experience with glassware unexpectedly breaking despite no obvious misuse on your part, report the incident to the CPSC at 800-638-27672 or info@cpsc.gov.

 

 

Source(s):

Consumer Reports, January, 2011, pp. 44-48.

 

 

 

 

ETHEL TIERSKY, the editor and frequent author for http://shelflifeadvice.com,has been a free-lance writer since 1963 and a food safety fanatic for even longer. She has published dozens of magazine articles and co-authored 14 grammar texts and readers for adults studying the English language. Developing http://shelflifeadvice.com has kept her busy since retiring from her teaching position as associate professor of English at Harry Truman College in Chicago. Some of her other writings for the site include “Don’t Let Those Food Expiration Dates Scare You,” product write-ups on mayonnaise and water, and “Pyrex Glassware: Is It Safe to Use?”

back glass prep

Related Back Glass Articles

Back Painted Glass Guide

The practice of utilizing back painted glass in home dcor has become more and more common in recent years. One of the main reasons for this is the popularization of premium self-priming glass paint. These paints take the guesswork out of back painting glass. They form a permanent bond with the glass by causing a molecular change in the surface of the glass itself. No primers or special treatments are necessary. The ease at which glass can now be painted has led many homeowners to undertake the task themselves. In this article we’ll cover some tips and tricks for dealing with some challenges associated with back painting glass.

How to clean glass paint overspray off back painted glass

Cleaning paint overspray off the front or edges of a sheet of glass is a simple enough process that may require some elbow grease. Use light steel wool to remove overspray from the edges of the glass and then use lacquer thinner to remove any on the front of it. For really thick overspray, use a single edge razor blade to scrape it and then follow up with steel wool and lacquer thinner as necessary.

How to clean glass paint from a paint gun

Once again, lacquer thinner is recommended for this job. Use it with a cloth to clean out your paint gun after each use and be sure to spray lacquer thinner through the paint gun for at least 30 seconds. And for an extra thorough clean feel free to disassemble the paint gun and clean all of the internal parts with lacquer thinner as well.

Tips on installing back painted glass

Now that you’re done painting your glass it’s time to put it on display in a way that won’t have it lying on the ground in a hundred pieces. The industry standard for installing back-painted glass is to use clear silicone glue and double sided glaziers tape. The double sided tape serves as a temporary hold until the clear silicone glue dries. Mirror Mastic and Liquid Nails can also be used for installation.

If you need inspiration or examples on how to use back painted glass in your home then feel free to check out this glass paint gallery.

More Back Glass Articles

Selecting an Auto Glass Replacement Shop

When a windshield or another piece of auto glass breaks on a vehicle, many people aren´t quite sure who to call. Oftentimes, they´ll call a regular glass or window shop only to find that the two types of glass work are completely different industries.

Other times, they´ll call their local auto body shop or repair facility and find out that they don´t replace auto glass either. In many cases, these shops will take the vehicle in and bring in an auto glass replacement company but the customer usually ends up paying more than they should.

A better way to get a windshield or a door glass replaced is to find a good auto glass replacement company. These companies specialize in replacing automotive glass and know all of the safety issues and federal laws governing the installation of these vital pieces of your car.

In fact, much of the glass in a car is considered part of the car´s safety system. For example, the windshield helps support the roof of the car in the case of a rollover accident and it also works in conjunction with the passenger side airbag. Because of its critical role, only a professional installation using the proper adhesives, primers and techniques will do.

How do you know if an auto glass replacement shop follows the appropriate guidelines? Membership in two key associations shows a glass replacement shop´s commitment to safe auto glass installations. These two associations are the NGA and AGRSS.

The National Glass Association is the auto glass replacement industry´s trade association. An excerpt from the NGA´s Mission Statement says it all, “To provide information and education, as well as promote quality workmanship, ethics, and safety in the architectural, automotive and window and door glass industries.”

The NGA certifies auto glass technicians at all levels. The highest NGA certification is the Master level. These technicians are the cream of the crop and highly experienced. If you have a high-end car, request an NGA Certified Master Technician. When you choose a shop that is an NGA member that employs NGA certified technicians, you can be sure the technicians have the training required to restore your car to its factory original crashworthiness.

The Auto Glass Replacement Safety Standards Council, or the AGRSS, is a non-profit organization dedicated to safe auto glass replacements. It is comprised of industry member organizations who value safety as one of their primary goals. Auto glass replacement companies who belong to this organization are committed to safe auto glass practices and techniques.

In addition to a glass shop´s commitment to safety through the organizations they belong to, find an auto glass replacement shop that uses quality materials. Original equipment manufacturer (OEM) glass and adhesive systems are preferred and oftentimes cost the same as after-market knockoffs in competitive markets. Find out if your vehicle will be safe to drive after the installation or if the adhesive will need to cure first. Even the best adhesives must cure before the car is safe to drive. OEM quick cure adhesives are available if time is of the essence however they generally cost more. Reputable shops will make sure you are aware of how long your car will be disabled.

Most auto glass replacement companies have both mobile and in-shop service for your convenience. Choose the option that best suits your needs. If you want them to come to your home or business, this frees you up from sitting in a waiting room while they do the job. Mobile service is about as convenient as possible though you will usually not be given an exact time but rather a range of several hours.

Auto glass replacement shops can be found in the yellow pages under Glass/Automotive. A better way to find a quality shop is to get a referral. Word of mouth referrals from trusted sources are invaluable. Dealerships and insurance agents are especially good sources to ask because they deal with auto glass companies on a daily basis.

For example, if your Mercedes dealer has a favorite technician or glass company, he´ll let you know. You can be assured that the recommended shop has a great deal of Mercedes experience and has earned the trust and respect of your dealer.

In addition, your insurance agent has a great deal of clout with the auto glass shop. Asking your insurance agent for a referral, even if you won´t be filing a claim, gives you the upper hand in the transaction. The glass shop depends on insurance claims and referrals and will do everything to keep you happy, satisfied and safe. You´ll likely get priority service when the shop knows you are affiliated with an insurance agent.

Finding a good auto glass replacement shop is just a phone call or even an internet web search away. In calling or researching the shops, inquire about their NGA and AGRSS memberships, ask about their safety procedures and find out if their technicians are certified with the NGA.

Written by CelesteStewart
Celeste Stewart is a successful freelance writer with a background in telecommunications and marketing.